|7 1/4 inch gauge Alco 2-6-2T - stock code 6227|
A 7 1/4 inch gauge Alco 2-6-2T, doubled up from Don Young's "Mountaineer" drawings. We bought this one from the builder back in 2014 - those who visited may remember it running at our open day that year. It went out for a run on a private railway later in the year, after which it was put away on a shelf - we had a fancy to repaint into WW1 livery, finding the time to do it was another matter...
Fast forwards two years, the engine has been stripped, the chassis overhauled, cab and tanks have been sprayed in two-pack (same as our Staffords) and then signwritten. It was in steam for the first time this afternoon (there's some video of it here) - it impressed me when I first drove it at the builder's club back in 2014, it's a strong, free-steaming engine.
Steel boiler, expanded steel tubes, 100psi working pressure. Feed by twin injectors. Twin pop-type safety valves. Cast iron cylinders with slide valves actuated by Walchaerts gear, pole reverser in the cab. Cab-operated drain cocks. Twin mechanical lubricators mounted on the nearside running board, driven by return crank. Compensated leaf springing, including front bogie which is connected by lever to the leading driving wheel spring hangers. Vacuum brake equipment with ejector, gauge and driver's brake valve mounted in the bunker.
Rare in this gauge (in fact in any gauge other than 3 1/2 really), it makes for a big, powerful engine: over six feet long, we'd estimate around a half ton in weight.
Length 76 inches
|Date of manufacture||1994|
|Construction||Welded steel, expanded tubes|
|Hydraulic test, test pressure/date tested||150psi, 1-Mar-2017|
|Steam test||7-Mar-2017, valid to 6-May-2018|
[ Home ] [ Up ]