7 1/4 inch gauge LNER V2 2-6-0 - stock code 7137

A well engineered 7 1/4 inch gauge LNER V2, 60809 "The Snapper". It came to us along with a Black 5 from the late owner's son, the engine hadn't been run in some years. Overall it's in super condition, mechanically it runs very well, fit and finish of the valve gear and motionwork is good, the engine is nicely detailed throughout. Both engine and tender are vacuum braked, unusual in this scale, wheels have steel tyres fitted. There's a super whistle mounted underneath the rear driving wheels, about a foot long and with a most mellifluous note.

Silver soldered copper boiler by Swindon Boilers, 100psi working pressure. Four element radiant superheaters, feed by twin injectors. Twin pop type safety valves.

Cast iron cylinders with piston valves actuated by Gresley-Holcroft conjugated gear, the centre cylinder's valve deriving motion from the Walshaerts-controlled outer cylinder valves. Triple sight feed lubricators with tank underneath footplate.

Vacuum ejector with gauge and driver's brake valve in the cab, brake cylinders fitted to locomotive and tender, with reservoir fitted to tender chassis.

There's a clip of it running outside the workshop here.

Length
Locomotive 65 inches
Tender 37 inches

Boiler number 7137
Builder Swindon Boilers
Date of manufacture Unknown
Construction Copper, silver soldered throughout
Working pressure 100psi
Hydraulic test, test pressure/date tested 200psi, 13-Feb-2017
Steam test 18-Feb-2017, valid to 17-Apr-2018

[ Home ] [ Up ]

full size image full size image full size image full size image
full size image full size image full size image full size image
full size image full size image full size image full size image
full size image full size image full size image full size image
full size image full size image full size image full size image
full size image full size image full size image full size image
full size image full size image full size image full size image
full size image full size image full size image